Skip to content

TomoWISE

micro- and nano-tomography, Technical Design Report phase.

Property Value
Facility MAX IV (Tango / Sardana)
Source insertion-device
Modelled in design, full coverage

Generated from the descriptor

This page is generated from the descriptor at deployments/tomowise/beamline.yaml. Edit the descriptor, not this page.

The values are read from the beamline's design report and carried confirm until staff verify them against the built instrument.

Enclosures

Enclosure Role Facility Permit signal
TomoWISE-optics optics-hutch maxiv confirm: MAX IV PSS permit signal TBD (PSS-1)
TomoWISE-experiment experiment-hutch maxiv confirm: MAX IV PSS permit signal TBD (PSS-1)

The beamline

A MAX IV micro- and nano-tomography beamline (two endstations on a shared source) modelled from its design report; the tomography spine on a Tango / Sardana floor.

  • Source: the beam, produced and conditioned before the sample.
  • Sample: the sample environment and its positioning.
  • Detector: what records the beam after the sample.
  • Controls: the control plane CORA's edge conducts over.

Not yet documented

This beamline has no Operations runbook and no live Experiment view, because CORA does not drive it yet. Both pages describe what an operator does with a running system, so writing them for a beamline CORA only models would be invention rather than documentation. The pilot at 2-BM carries both, and shows the shape they take once a deployment goes live.

More