Detector¶
Area detectors¶
The area and point detectors: an Eiger 1M, flag-view cameras, and a Vortex fluorescence detector.
Enclosure: 4-ID-G.
Note
Eiger binds the Camera Family (area detector); the Vimba flag cameras are alignment views. sgz_vortex was misinferred as a 4-ID-D enclosure (4iddMZ0 prefix); placed at 4-ID-G pending confirmation (TOPO-3, DET-2).
| Name | Family | PV | Key specs | Replaceable | Status |
|---|---|---|---|---|---|
Eiger1M |
Camera |
4idEiger: |
Eiger 1M area detector (DET-1) | new confirm |
|
FlagCamera_HHL |
Camera |
4idaPostMirrBeam: |
post-mirror beam-view flag camera (Vimba) | new confirm |
|
FlagCamera_Mono |
Camera |
4idaPostMonoBeam: |
post-mono beam-view flag camera (Vimba) | new confirm |
|
VortexFluorescence |
PositionMonitor |
4iddMZ0: |
confirm: station is a guess: the 4iddMZ0 prefix was misread as a 4-ID-D enclosure (TOPO-3, DET-2) SGZ Vortex fluorescence detector; classification and station unconfirmed (DET-2, TOPO-3) |
new confirm |
Beam position monitors¶
The beam-position and intensity monitors (XBPMs, Sydor electrometers, TetrAMM, I0 chambers) that diagnose beam position and normalize intensity.
Enclosure: 4-ID-G.
Note
These bind the graduated PositionMonitor Family (presenting the Sensor Role), a consumer alongside the wide fleet that earned it; the per-Asset beam-center calibration and channel map stay pending (BPM-1, FAM-1).
| Name | Family | PV | Key specs | Replaceable | Status |
|---|---|---|---|---|---|
XBPM_G |
PositionMonitor |
x: 4idgSoft:m48y: 4idgSoft:m47 |
4-ID-G X-ray beam-position monitor | new confirm |
|
XBPM_H |
PositionMonitor |
x: 4idhSoft:m6y: 4idhSoft:m5 |
4-ID-H X-ray beam-position monitor | new confirm |
|
Sydor_G |
PositionMonitor |
4idgSydor:T4U_BPM: |
4-ID-G Sydor electrometer beam-position monitor | new confirm |
|
Sydor_H |
PositionMonitor |
4idhSydor:T4U_BPM: |
4-ID-H Sydor electrometer beam-position monitor | new confirm |
|
TetrAMM_B |
PositionMonitor |
4idbSoft:TetrAMM: |
4-ID-B TetrAMM picoammeter / position monitor | new confirm |
Counters¶
The scaler / counter channels shared across the stations.
Enclosure: 4-ID-B.
Note
CTR8-based scalers; bound to the GenericProbe Family (the APS facility-scope counter probe).
| Name | Family | PV | Key specs | Replaceable | Status |
|---|---|---|---|---|---|
Scaler_1 |
GenericProbe |
4idCTR8_1:scaler1 |
CTR8 scaler channel set 1 (shared B/G/H) | new confirm |
|
Scaler_2 |
GenericProbe |
4idCTR8_1:scaler2 |
CTR8 scaler channel set 2 (shared B/G/H) | new confirm |