Source¶

The incident beam, produced, conditioned, and defined before the sample. The controllers that drive these devices are on the Controls page. Each device pairs its human name with its control handle, its key specs, and whether it is field replaceable. new marks a device not yet modeled in CORA; confirm marks a value taken from the docs that staff have not yet verified.

Generated from the descriptor

This page is generated from the descriptor at deployments/p10/beamline.yaml. Edit the descriptor, not this page.

Property	Value
Facility	petra-iii
Sector	P10
Tier	Unit
Source	insertion-device (confirm: P10 is an undulator beamline (coherent hard X-rays); the OnlineXML exposes the undulator (p10/undulator) and its gap (p10/attributemotor/UNDULATORGAP) but no period or parameters, carried pending (SRC-1))

Source¶

The P10 undulator source and the optics hutch: the double-crystal monochromator, the optics stages, and the beam shutter, feeding a coherent beam to the three experiment areas.

Enclosure: p10-opt.

Note

Undulator on p10/undulator with the gap as an attributemotor; the DCM is dcmmotor / dcmener with a coupled P10ENERGY axis. The OPT_MOT bank carries the optics positioning, roles not labelled (GROUP-1).

Name	Family	PV	Key specs	Status
`Undulator`	`InsertionDevice`	undulator: `p10/undulator/1` gap: `p10/attributemotor/UNDULATORGAP`	P10 undulator; gap read from the registry, period not exposed (SRC-1)	`new` `confirm`
`Monochromator`	`Monochromator`	bragg: `p10/dcmmotor/DCM_BRAGG` energy: `p10/dcmener/FMBENERGY` energy_mnchr: `p10/dcmener/MNCHRMTR` energy_all: `p10/multiplemotors/P10ENERGY`	double-crystal monochromator (DCM_BRAGG / FMBENERGY, with the coupled P10ENERGY axis); crystal cut and energy range are OPT-1	`new` `confirm`
`OpticsStages`	`LinearStage`	bank: `p10/motor/OPT_MOT01`	the optics-hutch motor bank (OPT_MOT01..32 on p10/motor): mirror / slit / lens motions, per-axis roles not labelled, grouped as one stage (OPT-1, GROUP-1)	`new` `confirm`
`OpticsVirtualStages`	`PseudoAxis`	bank: `p10/vmexecutor/vm_opt_01`	the optics-hutch virtual / coupled axes (vm_opt_* on vmexecutor): slit center / gap and coupled optics motions (GROUP-1)	`new` `confirm`
`BeamShutter`	`Shutter`	shutter: `p10/shutter/P10SHUTTER`	the P10 beam shutter (P10SHUTTER); gates the coherent beam into the experiment areas (PSS-1)	`new` `confirm`