Sample¶

Diffractometer¶

The 8-ID-E six-circle Huber diffractometer endstation, with its temperature controllers and beam-position monitor.

Enclosure: 8-ID-E.

Note

huber is a six-circle diffractometer (mu, eta, chi, phi, nu, delta) plus x/y/z sample translation, modelled as a plain device with its circle axis map; the reusable Assembly(Diffractometer) is designed on model.md (DIFF-1). psic is the reciprocal-space pseudo-axis layer (hklpy2). The LakeShore controllers and the Sydor beam-position monitor bind loose Families that 4-ID also uses, held for gate-review (see model.md).

Name	Family	PV	Key specs	Status
`Diffractometer_SixCircle`	`Goniometer`	mu: `8ideSoft:CR8-E1:m6` eta: `8ideSoft:CR8-E1:m7` chi: `8ideSoft:CR8-E1:m8` phi: `8ideSoft:CR8-E1:m9` nu: `8ideSoft:CR8-E1:m4` delta: `8ideSoft:CR8-E1:m5` x: `8ideSoft:CR8-E1:m15` y: `8ideSoft:CR8-E1:m10` z: `8ideSoft:CR8-E1:m11`	six-circle Huber diffractometer; the six circles (mu/eta/chi/phi/nu/delta) confirm the Assembly slot shape (DIFF-1)	`new` `confirm`
`ReciprocalSpace`	`PseudoAxis`	`8ideSoft:CR8-E1:`	hklpy2 reciprocal-space pseudo-axis over the six-circle geometry (psic); the partition rule is DIFF-2	`new` `confirm`
`TemperatureController_1`	`TemperatureController`	`8ideSoft:LS336:1:`	LakeShore 336 sample temperature controller (TEMP-1)	`new` `confirm`
`TemperatureController_2`	`TemperatureController`	`8ideSoft:LS336:2:`	second LakeShore 336 controller (TEMP-1)	`new` `confirm`
`BeamPositionMonitor_E`	`PositionMonitor`	`8ideBPM:T4U_BPM:`	Sydor TetrAMM beam-position monitor at 8-ID-E (BPM-1)	`new` `confirm`
`FastShutter`	`Shutter`	`8ideSoft:fastshutter:`	fast shutter gating the XPCS exposure (XPCS-1)	`new` `confirm`

Xpcs sample¶

The XPCS sample endstation in 8-ID-I: the Aerotech sample and rheometer stages and the temperature-controlled sample holders.

Enclosure: 8-ID-I.

Note

sample is a three-axis Aerotech translation stage (LinearStage); the rheometer is a six-axis shear-cell sample environment bound to a loose Rheometer Family. The Quantum Northwest holders (qnw) are temperature-controlled sample cells.

Name	Family	PV	Key specs	Status
`SampleStage`	`LinearStage`	x: `8idiAerotech:m1` y: `8idiAerotech:m3` z: `8idiAerotech:m2`	Aerotech XPCS sample positioning stage	`new` `confirm`
`Rheometer`	`Rheometer`	x: `8idiAerotech:m8` y: `8idiAerotech:m9` z: `8idiAerotech:m7` pitch: `8idiAerotech:m11` roll: `8idiAerotech:m10` yaw: `8idiAerotech:m12`	six-axis rheometer shear-cell sample environment (SAMPLE-1)	`new` `confirm`
`SampleHolder_QNW`	`TemperatureController`	`8idiSoft:QNWenv_1:`	Quantum Northwest temperature-controlled sample holder; three units QNWenv_1..3 (TEMP-1)	`new` `confirm`
`SampleSlit`	`Slit`	`8idiSoft:Slit1`	8-ID-I sample slit	`new` `confirm`