Detector

Detectors

The coherent-scattering area detectors (a Pilatus, an Eiger on a translation stage, and a WAXS detector on a pedestal), the beam stop, and the beam-position monitors.

Enclosure: 9-ID-D.

Note

Pilatus and Eiger record the small-angle coherent pattern; the WAXS detector on its pedestal records the wide-angle signal for GIWAXS. The beam stop and its carriage block the direct beam. The TetrAMM and the two XBPMs bind the graduated PositionMonitor Family (a consumer alongside 4-ID and 8-ID; DIAG-1 / FLUX-1, BPM-1).

Name	Family	PV	Key specs	Replaceable	Status
Pilatus1M	Camera	PILATUS_1MF:	Pilatus 1M coherent-scattering detector (DET-1)		new confirm
EigerDetector	Camera	9idEiger:	Eiger coherent-scattering detector; model unconfirmed, prefix is a guess pending CTRL-1 (DET-1)		new confirm
DetectorStage	LinearStage	x: 9idGT:m11 y: 9idGT:m12	Eiger detector positioning stage (eiger_x / eiger_y)		new confirm
WAXSDetector	Camera	pedestal_x: 9idd:CR9D1M1:m31 pedestal_y: 9idd:CR9D1M1:m32	wide-angle (GIWAXS) detector on its pedestal; detector model is DET-1		new confirm
BeamStop	BeamStop	x: 9idd:CR9D4M1:m14 z: 9idd:CR9D4M1:m15 carriage_y: 9idGT:m1 carriage_bottom: 9idGT:mcs2-02:m3	direct-beam stop and its carriage		new confirm
TetrAMM	PositionMonitor	9idTetra:QUAD1:	TetrAMM picoammeter / position monitor, four channels (BPM-1)		new confirm
XBPM_1	PositionMonitor	9idd:	confirm: device prefix inferred from the 9-ID-D station; the xpbm1 sum/x/y signals carried no device prefix in the config (CTRL-1) X-ray beam-position monitor (xpbm1 sum/x/y signals, lifted from the config's metadata bucket as a genuine diagnostic); position-vs-intensity role is BPM-1		new confirm
XBPM_2	PositionMonitor	9idd:	confirm: device prefix inferred from the 9-ID-D station; the xpbm2 sum/x/y signals carried no device prefix in the config (CTRL-1) second X-ray beam-position monitor (xpbm2 sum/x/y signals, lifted from the config's metadata bucket); position-vs-intensity role is BPM-1		new confirm