Detector¶
Detection¶
The Eiger 1M area detector (the primary scattering detector), the diagnostic screen cameras, and the motorized beam-position monitor.
Enclosure: isr-endstation.
Note
The Eiger 1M binds Camera (the only detector scanned in the profile collection's plans); the diagnostic YAG-screen cameras bind Camera; the motorized beam-position-monitor stage binds the graduated PositionMonitor Family (DIAG-1). The QuadEM flux-monitor electrometers are defined but commented out in source, so no FluxMonitor Asset is modelled (DET-1); there is no point / scaler detector for diffraction counting (intensity is read from the Eiger).
| Name | Family | PV | Key specs | Replaceable | Status |
|---|---|---|---|---|---|
AreaDetector |
Camera |
XF:04IDD-ES{Det:Eig1M} |
the Dectris Eiger 1M area detector, the primary scattering detector (the only detector in the profile collection's scan plans); it carries the scattering-geometry metadata (detector distance, beam center, photon energy) as detector config, not as a motorized arm; the model size and the write path (a commissioning testing/ path) are DET-1 | new confirm |
|
DiagnosticCamera |
Camera |
XF:04IDC-BI:1{Scr:3} |
the diagnostic YAG fluorescent-screen beam-viewing cameras (three Prosilica in zones A and C); beam alignment / diagnostics, not a science detector (DIAG-1) | new confirm |
|
BeamPositionMonitor |
PositionMonitor |
XF:04IDB-BI:1{BPM:3-Ax:X}Mtr |
the motorized beam-position-monitor stage (x / y) in zone B; only the stage motors are bound, the QuadEM electrometers that would read the flux / position are commented out in source (DIAG-1) | new confirm |