Source

The incident beam, produced, conditioned, and defined before the sample. The controllers that drive these devices are on the Controls page. Each device pairs its human name with its control handle, its key specs, and whether it is field replaceable. new marks a device not yet modeled in CORA; confirm marks a value taken from the docs that staff have not yet verified.

Generated from the descriptor

This page is generated from the descriptor at deployments/p06/beamline.yaml. Edit the descriptor, not this page.

Property	Value
Facility	petra-iii
Sector	P06
Tier	Unit
Source	insertion-device (confirm: P06 is an undulator beamline (hard X-ray micro / nano probe); the OnlineXML exposes the undulator (p06/undulator) and its gap / harmonic / taper virtual axes (p06/attributemotor) but no period or parameters, carried pending (SRC-1))

Source

The P06 undulator source, with its gap, harmonic, and taper as virtual axes coupled into the beamline energy.

Enclosure: p06-mono.

Note

Undulator on p06/undulator; the gap / harmonic / taper are attributemotor virtual axes coupled into energy_und. Period and parameters are SRC-1.

Name	Family	PV	Key specs	Replaceable	Status
Undulator	InsertionDevice	undulator: p06/undulator/1 gap: p06/attributemotor/gap harmonic: p06/attributemotor/harmonic taper: p06/attributemotor/taper	P06 undulator; gap / harmonic / taper read from the registry, period not exposed (SRC-1)		new confirm

Mono optics

The monochromator hutch: a double-crystal monochromator and a multilayer monochromator (selectable mono branches), the optics-hutch defining slits, and a quadrant beam-position monitor.

Enclosure: p06-mono.

Note

The DCM (dcmmotor / dcmener) and the multilayer mono (lom) are selectable; energy_all couples the undulator + mono. The mono_mot bank (29 axes) carries the mono-internal and optics-hutch motions, roles not labelled (GROUP-1). The optics-hutch slits are vmexecutor virtual gap / offset axes.

Name	Family	PV	Key specs	Replaceable	Status
Monochromator	Monochromator	bragg: p06/dcmmotor/mono.01 energy: p06/dcmener/mono.01 exit_offset: p06/attributemotor/exitoffset energy_all: p06/multiplemotors/mono.01 energy_und: p06/undulator/1 jacks: p06/vmexecutors/hhl_jacks mot09: p06/motor/mono.09 mot10: p06/motor/mono.10	double-crystal monochromator (dcm_bragg / energy_fmb, fixed-exit offset, hhl jacks); energy_all is the coupled undulator + mono energy; crystal cut is OPT-1		new confirm
MultilayerMonochromator	Monochromator	pitch1: p06/lom/exp.01 roll1: p06/lom/exp.02 pitch2: p06/lom/exp.03 lateral2: p06/lom/exp.04 hub2: p06/lom/exp.05 hub1: p06/lom/exp.06 linear2: p06/lom/exp.07 lateral1: p06/lom/exp.08	multilayer monochromator (ML_*, the lom Tango family): higher-flux lower-resolution branch selectable against the DCM; multilayer d-spacing is OPT-1		new confirm
MonochromatorStages	LinearStage	bank: p06/motor/mono.01	the mono-hutch motor bank (mono_mot01..48, 29 modellable axes on p06/motor/mono.*): mono-internal and optics-hutch positioning, per-axis roles not labelled, grouped as one stage carrying the bank prefix (GROUP-1)		new confirm
OpticsHutchSlits	Slit	h_gap: p06/vmexecutors/ohhorizontalgap h_offset: p06/vmexecutors/ohhorizontaloffset v_gap: p06/vmexecutors/ohverticalgap v_offset: p06/vmexecutors/ohverticaloffset	optics-hutch defining slit (oh slit: virtual h/v gap and offset on vmexecutors)		new confirm
SecondarySlit	Slit	h_gap: p06/vmexecutors/ps2horizontalgap h_offset: p06/vmexecutors/ps2horizontaloffset	secondary slit (ps2: virtual horizontal gap / offset)		new confirm
QuadrantBPM	FluxMonitor	i404: p06/i404/mono.01	mono-hutch quadrant beam-position monitor (i404 electrometer)		new confirm