Source

The incident beam, produced, conditioned, and defined before the sample. The controllers that drive these devices are on the Controls page. Each device pairs its human name with its control handle, its key specs, and whether it is field replaceable. new marks a device not yet modeled in CORA; confirm marks a value taken from the docs that staff have not yet verified.

Generated from the descriptor

This page is generated from the descriptor at deployments/2-id/beamline.yaml. Edit the descriptor, not this page.

Property	Value
Facility	aps
Sector	Sector 2
Tier	Unit
Source	insertion-device (confirm: Sector 2 undulator; exact device type, period, and the post-APS-U source configuration unconfirmed (SRC-1, TOPO-1))

Insertion device

The Sector 2 insertion-device source, upstream of the hutches. EAA does not describe the source, so it is carried thin and confirm as a single undulator pending the source table and the post-APS-U configuration.

Note

Modelled as one InsertionDevice Asset. Device type, period, and gap, and whether the front end feeds more than one hutch, are unconfirmed (SRC-1, TOPO-1).

Name	Family	PV	Key specs	Replaceable	Status
Undulator	InsertionDevice		Sector 2 undulator source; type and period unconfirmed (SRC-1)		new confirm

Monochromator

The monochromator that selects the scanning energy, in the upstream optics area. A hard X-ray microprobe runs monochromatic; the device is carried as a double-crystal monochromator pending confirmation, since EAA does not describe the optics.

Note

Presence assumed from the technique (a monochromatic scanning microprobe); crystal, energy range, axes, and the optics-hutch it sits in unconfirmed (MONO-1, TOPO-1).

Name	Family	PV	Key specs	Replaceable	Status
Monochromator	Monochromator		double-crystal monochromator assumed; crystal and energy range unconfirmed (MONO-1)		new confirm

Focusing optics

The probe-forming optic in the 2-ID-D hutch: a Fresnel zone plate focuses the monochromatic beam to the scanning spot just upstream of the sample. This is the defining optic of the microprobe and the one EAA's autofocus loop drives (the zp_z focus axis).

Enclosure: 2-ID-D.

Note

The zone plate binds the catalog ZonePlate Family (graduated with 32-ID + FXI). Its focus axis (zp_z in EAA) is the actuator CORA's Conductor would drive during autofocus; the order-sorting aperture standard to a zone-plate microprobe is not evidenced and is folded into OPTICS-1, not invented.

Name	Family	PV	Key specs	Replaceable	Status
ZonePlate	ZonePlate		probe-forming Fresnel zone plate with a zp_z focus axis (EAA aps_mic autofocus); outermost-zone width, diameter, and the order-sorting aperture unconfirmed (OPTICS-1).		new confirm