Detector¶
Detection¶
The P14 detection: EH1 carries three Dectris Eiger area detectors (a 16M silicon and two CdTe variants, 16M and 4M) for MX diffraction across energy ranges, plus the flux monitor, the on-axis and X-ray-imaging cameras, and the XRF fluorescence detector; EH2 carries a Dectris Pilatus 2M area detector.
Enclosure: p14-eh1.
Note
EH1 handles read from the TINE detector channels (/P14/detector/*); EH2 from /PE2/detector/pilatus2m. The detector distance / resolution are pseudo-axes on the TINE collection service (DET-1).
| Name | Family | PV | Key specs | Replaceable | Status |
|---|---|---|---|---|---|
EigerDetector |
Camera |
tine: /P14/detector/eiger16m |
the EH1 Dectris Eiger 16M silicon area detector (EMBLDetector, model read '16M' from the config); the primary MX diffraction detector (DET-1) | new confirm |
|
EigerCdTe16MDetector |
Camera |
tine: /P14/detector/eiger16m-cdte |
the EH1 Dectris Eiger 16M CdTe area detector (EMBLDetector, model read '16M' from the config); the high-energy CdTe-sensor MX detector variant (DET-1) | new confirm |
|
EigerCdTe4MDetector |
Camera |
tine: /P14/detector/eiger4m-cdte |
the EH1 Dectris Eiger 4M CdTe area detector (EMBLDetector, model read '4M' from the config); the smaller high-energy CdTe MX detector variant (DET-1) | new confirm |
|
PilatusDetectorEH2 |
Camera |
tine: /PE2/detector/pilatus2m |
the EH2 Dectris Pilatus 2M area detector (EMBLDetector, model read '2M' from the config); the EH2 MX diffraction detector (DET-1) | new confirm |
|
DetectorDistance |
PseudoAxis |
tine: /P14/collection/distance |
the EH1 detector-distance virtual axis (TINEMotor on /P14/collection/distance) and the coupled resolution axis (/P14/collection/resolution); the sample-to-detector geometry as a derived axis; EH2 carries its own /PE2/collection/* pair (DET-1) | new confirm |
|
FluxMonitor |
FluxMonitor |
tine: /P14/PinDiode/Device0 |
the pin-diode flux monitor (EMBLFlux on /P14/PinDiode/Device0); incident-flux normalization for MX data collection (DIAG-1) | new confirm |
|
OnAxisCamera |
Camera |
confirm: the on-axis sample-viewing camera (VimbaVideo / QtAxisCamera); no Exporter / TINE handle in the config object, the video source is carried confirm (OAV-1) |
the EH1 on-axis sample-viewing video camera and the sample-changer camera (VimbaVideo / QtAxisCamera); the MX centring / loop-inspection video, control handle pending (OAV-1) | new confirm |
|
XrayImagingCamera |
Camera |
confirm: the X-ray imaging camera (EMBLXrayImaging); no Exporter / TINE handle in the config object, the video source is carried confirm (IMG-1) |
the EH1 X-ray imaging camera (EMBLXrayImaging); in-situ sample / loop X-ray imaging for centring, control handle pending (IMG-1) | new confirm |
|
FluorescenceDetector |
EnergyDispersiveSpectrometer |
tine: /P14/fluorescence-scan/fls-scan |
the energy-dispersive XRF detector (EMBLXRFSpectrum on /P14/fluorescence-scan/fls-scan); element identification / edge scanning for anomalous MX (DET-1) | new confirm |